Mapping of brain activity in mesencephalic and diencephalic structures of toads during presentation of visual key stimuli: a computer assisted analysis of (14C)2DG autoradiographs

Summary The (¹⁴C)2DG autoradiographic technique has been employed to quantitatively map glucose utilization in the mesencephalon, the diencephalon and the cerebellum, of toads in response to configurational moving visual stimuli: (i) a 0.4 cm × 2.8 cm worm-like stripe (W) which elicited prey catching responses, (ii) a 8.4 cm × 8.4 cm square (S) that released predator avoidance responses, and (iii) a 2.8 cm × 0.4 cm antiworm-like stripe (A) which elicited no motor activity.For various brain nuclei different relationships were obtained: The optic tectum showed statistical significant higher 2DG uptake during worm-stimulation (¯X _W) than during antiworm stimulation (¯X _A), i.e.¯X _W>¯X _A. The latter visual pattern led to a 2DG utilization that was statistically significant stronger than during stimulation with a square (¯X _S), i.e.¯X _A>¯X _S. Thus, in comparison between right and left hemisphere as well as between brains the following ratios were obtained:Optic tectum:¯X _W>¯X _A>¯X _S; nucleus isthmi:¯X _W>¯X _A-¯X _s; posterodorsal lateral thalamic nucleus:¯X _S>¯X _A>¯X _W; posteroventral lateral thalamic nucleus:¯X _S>¯X _A¯X _W; posterior thalamic nucleus:¯X _W>¯X _A¯X _S; anteripr division of the lateral thalamic nucleus:¯X _W>¯X _A¯X _S; anterior thalamic nucleus:¯X _A>¯X _S>¯X _W; nucleus of Bellonci and dorsal division of the ventrolateral thalamic nucleus:¯X _W¯X _A¯X _S; cerebellum:¯X _S¯X _W>¯X _A.Abbreviations A anterior thalamic nucleus - Cb cerebellum - Hyp hypothalamus - Ist nucleus isthmi - cl. Ist contralateral Ist - La lateral thalamic nucleus, anterior division - Lpd lateral thalamic nucleus, posterodorsal division - Lpv lateral thalamic nucleus, posteroventral division - MP medial pallium - NB/VLd nucleus of Bellonci and ventrolateral thalamic nucleus, dorsal division - P posterior thalamic nucleus - PO preoptic area - Sna snapping evoking area=ventrolateral tectum - Str striatum - Tec tectum opticum     

Characterization of nuclear phosphoprotein phosphatases from goat testis

Two nuclear phosphoprotein phosphatases (PPases I and II) that cause dephosphorylation of [32P]histone, have been partially purified from goat testis. The enzymic activity is associated with nucleoplasm and chromatin. PPase I is markedly stimulated (approx. 200-600%) by Mg2+ or Mn2+ (1 mM) whereas Ca2+ (1 mM) causes slight stimulation (approx. 35%) of the enzyme. On the contrary, PPase II is only slightly activated (20-40%) by these metal ions (5 mM). Both the phosphoprotein phosphatase isoenzymes are maximally active at pH 6-7. PPases I and II are strongly inhibited (approx. 60-100%) by ZnCl2 (1 mM), P1 (5 mM) and thiol reagents. NaF (5 mM) inhibits (approx. 40%) specifically the activity of PPase I rather than PPase II. PPases are strongly inhibited by relatively high concentration of NaCl (0.4 M), isoenzyme II being more sensitive (approx. 80%) than isoenzyme I (approx. 50%). In addition to histones, both the isoenzymes can as well cause dephosphorylation of protamine, casein, and testicular nuclear proteins. Enzymic characteristics of the testicular nuclear PPases are clearly different from those of the cytosolic enzyme previously characterized.     

Interaction of digitonin and its analogs with membrane cholesterol

The interaction of digitonin with membrane cholesterol was studied by using various digitonin analogs, and radioactive desglucodigitonin. The following results were obtained concerning the effect of digitonin on erythrocytes, granulocytes and liposomes. Digitonin and its analogs showed activity to induce hemolysis, granulocyte activation and liposomal membrane damage. The activity was affected by change of the carbohydrate residue of the molecule; the order of hemolytic activity was digitonin greater than or equal to desglucodigitonin much greater than glucosyl-galactosyl-digitogenin greater than galactosyl-digitogenin, digitogenin. The relative activities of these compounds to induce granulocyte activation and liposomal membrane damage were similar to those observed in the hemolysis. [3H]Desglucodigitonin could bind to cholesterol in liposomes. The binding was stoichiometric and the ratio of desglucodigitonin bound to liposomes/cholesterol in liposomes was close to 1, irrespective of the cholesterol content in liposome. Damage to liposomes was, however, induced by desglucodigitonin only when they contained more than 0.2 molar ratio of cholesterol to phospholipid. Addition of digitonin as well as desglucodigitonin to preformed liposomes deprived of cholesterol affected the anisotropic molecular motion of spin-labeled phosphatidylcholine incorporated into the liposomes, suggesting that the molecules could be inserted into the lipid bilayer free of cholesterol. Molecules of desglucodigitonin in the lipid phase may, however, be equilibrated with those in the aqueous phase, unless they form a complex with cholesterol, since no appreciable amount of [3H]desglucodigitonin could be detected in the liposome fraction after separation by column chromatography. Digitonin decreased the order parameter of spin-labeled phosphatidylcholine when liposomes contained equimolar cholesterol.(ABSTRACT TRUNCATED AT 250 WORDS)     

Insertion and fate of the cell wall in Bacillus subtilis

Cell wall assembly was studied in autolysin-deficient and -sufficient strains of Bacillus subtilis. Two independent probes, one for peptidoglycan and the other for surface-accessible teichoic acid, were employed to monitor cell surface changes during growth. Cell walls were specifically labeled with N-acetyl-D-[3H]glucosamine, and after growth, autoradiographs were prepared for both cell types. The locations of silver grains revealed that label was progressively lost from numerous sites on the cell cylinders, whereas label was retained on the cell poles, even after several generations. In the autolysin-deficient and chain-forming strain, it was found that the distance between densely labeled poles approximately doubled after each generation of growth. In the autolysin-sufficient strain, it was found that the numbers of labeled cell poles remained nearly constant for several generations, supporting the premise that completed septa and poles are largely conserved during growth. Fluorescein-conjugated concanavalin A was also used to determine the distribution of alpha-D-glucosylated teichoic acid on the surfaces of growing cells. Strains with temperature-sensitive phosphoglucomutase were used because in these mutants, glycosylation of cell wall teichoic acids can be controlled by temperature shifts. When the bacteria were grown at 45 degrees C, which stops the glucosylation of teichoic acid, the cells gradually lost their ability to bind concanavalin A on their cylindrical surfaces, but they retained concanavalin A-reactive sites on their poles. Discrete areas on the cylinder, defined by the binding of fluorescent concanavalin A, were absent when the synthesis of glucosylated teichoic acid was inhibited during growth for several generations at the nonpermissive temperature. When the mutant was shifted from a nonpermissive to a permissive temperature, all areas of the cylinder became able to bind the labeled concanavalin A after about one-half generation. Old cell poles were able to bind the lectin after nearly one generation at the permissive temperature, showing that new wall synthesis does occur in the cell poles, although it occurs slowly. These data, based on both qualitative and quantitative experiments, support a model for cell wall assembly in B. subtilis, in which cylinders elongate by inside-to-outside growth, with degradation of the stress-bearing old wall in wild-type organisms. Loss of wall material, by turnover, from many sites on the cylinder may be necessary for intercalation of new wall and normal length extension. Poles tend to retain their wall components during division and are turned over much more slowly.     

The crystallization of outer membrane proteins from Escherichia coli. Studies on lamB and ompA gene products

The outer membrane protein LambB from Escherichia coli has been crystallized from detergent-containing solutions. Several different crystal habits can be obtained under the same ionic and precipitant conditions by altering the detergent head group composition of the protein-detergent mixed micelle or by adding polar organic compounds. Two crystal forms have been partially characterized as P1 and C2221, the former diffracting to beyond 4 A resolution and the latter to 6 A. The detergents used were beta-octyl glucoside, octyl tetraoxyethylene, and octyl polyoxyethylene (polydisperse) either alone or as mixtures. In some experiments, the addition of small nonionic amphiphiles having n-butyl alkyl tails significantly influenced crystallization. The experiments suggest that the detergent region of the mixed micelle plays a critical role in crystal formation. Using the methods developed here for LamB and also for matrix porin (Garavito, R. M., Jenkins, J. A., Jansonius, J. N., Karlsson, R., and Rosenbusch, J. P. (1983) J. Mol. Biol. 164, 313-327), an additional protein from the outer membrane, OmpA, has been obtained as a microcrystalline preparation.     

An enzyme coimmobilized with a microorganism: the conversion of cellobiose to ethanol using beta-glucosidase and Saccharomyces cerevisiae in calcium alginate gels

The efficiency of beta-glucosidase and Saccharomyces cerevisiae in directly converting cellobiose to ethanol was studied for various combinations of the two catalytic species, both free and immobilized, in order to elucidate the advantages of using a coimmobilized system. The coimmobilized preparation was superior to a combination of separately immobilized biocatalysts. However, in this preparation, one-half the enzyme activity was lost within a week when incubated at the operational temperature in the absence of substrate. In continuous experiments, an 80% conversion of cellobiose to ethanol was obtained using the coimmobilized preparation, compared to 40% using separately immobilized biocatalysts when applying a dilution rate of 0.1 h(-1) in a packedbed reactor. The immobilized biocatalysts showed no decline in productivity during two weeks of continuous operation.     

Interaction of adrenocorticotropin-(11-24)-tetradecapeptide with neutral lipid membranes revealed by infrared attenuated total reflection spectroscopy

Infrared attenuated total reflection spectroscopy (IR-ATR) revealed that the hydrophilic adrenocorticotropin-(11-24)-tetradecapeptide ( ACTH11 -24, net charge 6+) assumed an irregular secondary structure when incorporated into the aqueous layers between equilibrated multibilayers of planar membranes prepared from 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine ( POPC ). This structure was characterized by a perpendicular orientation of the peptide bonds on the bilayer surfaces, as observed earlier for the corresponding segment of adrenocorticotropin-(1-24)-tetracosapeptide (ACTH1-24, 6+). Once incorporated, ACTH11 -24 was not removed by washing, in agreement with its strong positive charge. In contrast to ACTH1-24, ACTH11 -24 was not measurably adsorbed to the neutral membranes from 0.1 mM aqueous solutions. The more hydrophobic adrenocorticotropin-(1-10)-decapeptide is also not adsorbed. We therefore concluded that adsorption of ACTH1-24 to neutral membranes was dependent on its amphiphilic primary (amphipathic primary) structure that resulted from the covalent combination of the hydrophobic ACTH1-10 segment with the hydrophilic ACTH11 -24 segment. This conclusion was consistent with the results obtained by vesicle-mediated hydrophobic photolabeling and equilibrium dialysis.     

Kinetics of the interaction of hemin liposomes with heme binding proteins

As a model for the transport of hemin across biological membranes, sonicated phosphatidylcholine liposomes with incorporated hemin were characterized. The interaction of the hemin liposomes with the heme binding proteins albumin, apomyoglobin, and hemopexin was examined as a function of liposome charge and cholesterol content. In all cases, there was an almost complete transfer of hemin from liposome to protein; a rapid phase and a slow phase were observed for the transfer. For negatively charged liposomes (with 11% dicetyl phosphate), the rapid and slow phases showed observed rates of transfer of ca. 2 and 0.01 s-1, respectively, for all three proteins. The presence of cholesterol in the liposomes decreased the observed rates by a factor of 2, and positively charged liposomes (with 11% stearylamine) showed about one-fifth the observed rates of negatively charged liposomes. The observed rates were independent of protein concentration, indicating that the rate-determining step is hemin efflux from the lipid bilayer. The hemin interaction with the phospholipid bilayer is suggested to be primarily hydrophobic with some electrostatic character. The two phases are suggested to arise from two different populations of hemin within the liposomes and are interpreted as arising from two different orientations of hemin within the bilayer.     

Incorporation of ion channels from bovine rod outer segments into planar lipid bilayers.

Membranes vesicles, prepared from bovine rod outer segments were fused with planar lipid bilayers. Two different ion channels were identified by recording currents from single channels. Both types of channels were selective for sodium rather than potassium and were impermeable to chloride ions. Unit conductances were 20 and 120 pS, respectively, in 150 mM sodium chloride. The channel with the larger unit conductance was sensitive to the transmembrane potential. This channel rapidly activated within less than 10 ms after a voltage jump to a more negative membrane potential and then inactivated after several seconds. The duration of the active period and the properties of the channel depended on the amplitude of the voltage jump. The channel of smaller unit conductance did not show any voltage-dependent activation or inactivation. Both types of channels were insensitive to light in the planar bilayer system. Channels incorporated into planar bilayers on a Teflon sandwich septum or on the tip of a glass micropipette gave similar results.